1997 Boston Whaler® Dauntless 20 Factory Original (OEM) Canvas & Covers, TTopCover™, Shade Kit, T-Top Mooring Curtains, Copy Your Canvasor Covers, Copy Your Canvas or Covers, Bimini-Tops and Boat-Covers

Boston Whaler® Dauntless 20 (1997) dual console boat:

1997 Dauntless 20 dual console:

Measure your boat for Montauk-T-Topless-2™ folding T-Top height.

We have a fully tested custom TTopCover™ for this boat.

Factory Original Equipment Manufacturer (OEM) replacement canvas / covers:

OEM tags p/n [97BW20 D ON1 -x0xxx-Acc Bimini], Boston Whaler® p/n [1xxxxxx].
Originally offered in Captain Navy, Forest Green and Jockey Red (Mooring Cover was Cadet Grey) Sunbrella®.

Ameritex® (one of the two canvas/cover OEMs for Boston Whaler®) requires a PHOTO of the BLACK (Not White) Ameritex®/Taylor-Made® Laser-Printed TAG with P/N GREATER than 126000xxx on each piece of canvas, cover or frame to place an order. Customers who provide: • an InValid P/N, • P/N Less than 126000xxx, • or No Ameritex®/Taylor-Made® Black Tag Photo will be charged a 10% cancellation fee.
If your Black Ameritex® Tags are missing (they were not used until 2010, but would be on any replacement canvas made after 2010), please:

check with other Boston Whaler® owners at your Marina ,
or https://ownersclub.bostonwhaler.com/ ,
or https://www.facebook.com/groups/rohlfingswhalersearchsite/ ,
or https://continuouswave.com/forum/viewforum.php?f=3 / ,
or site:https://TheHullTruth.com Chaparral [your model] ,

or we can make EXACT COPIES of YOUR existing Tops and Covers, but cannot copy any canvas with windows (yet) due to window shrinkage issues: https://RnR-Marine.com/purchase.php?product=Copy-Canvas-Covers-ang#Options.

The Zippers on Factory OEM Boston Whaler® canvas are size #8 (8mm high, 6 teeth/inch). Boston Whaler® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell factory OEM canvas and covers direct for Boston Whaler® boats over 2 years old. The Boston Whaler® OEM canvas part number scheme: [xxxxx] identifies which canvas piece, [cc] is the color code. Boston Whaler® Hull Identification Number (HIN) = BWCsssssmbyy , where [yy] = model year.

All OEM canvas and covers listed below are made using the original, digitized patterns approved by Boston Whaler®.

Choose ANY available color (from our list) , see our Sunbrella® Color Swatch Chart to select your color.

Factory OEM Canvas, Covers and Tops for this particular boat model are no longer sold by RnR-Marine, Inc. (we do offer many other covers and products however).

Boat Covers, Carpet, TTopCovers™, T-Topless™, etc. are sold by RNR-Marine™, Inc. and [an error occurred while processing this directive]

Copy your factory OEM Bimini, Convertible, Sunshade or Camper Top(s) - Since we no longer offer the factory OEM Bimini, Sunshade or Camper Tops, send us yours and we will Copy them EXACTLY in premium Sunbrella® marine fabric , (click link to pick size)
Copy your factory OEM Bow and Cockpit Covers - Since we no longer offer the factory OEM Snap-On Bow and Cockpit Covers, send us yours and we will Copy them EXACTLY in premium Sunbrella® marine fabric , (click link to pick size)
Copy your factory OEM Cockpit Cover - Since we no longer offer the factory OEM Snap-On Cockpit Cover, send us yours and we will Copy it EXACTLY in premium Sunbrella® marine fabric , (click link to pick size)
Copy your factory OEM Boat or Mooring Cover - Since we no longer offer the factory OEM Boat or Mooring Covers, send us yours and we will Copy them EXACTLY in premium Sunbrella® marine fabric , (click link to pick size)
T-Top Boat Cover, Sunbrella® 9.25oz acrylic -
Custom fit LaPorte™ TTopCover™ (Sunbrella® 9.25oz./sq.yd. solution dyed acrylic fabric) attaches beneath your factory installed T-Top or Hard-Top to cover your entire boat and motor(s), GUARANTEED TO FIT, custom made for the 1997 Boston Whaler® Dauntless 20 , $1,447.97 , SALE PRICE: $1,361.09 (FALL Sale) , Lead time est. 3-6 biz days (TTopCovers, Curtains) and 2-3 days (Shade Kits) after order finalization as of 10/20/26.
T-Top Boat Cover, Elite™ 9oz fabric - Custom fit LaPorte™ TTopCover™ (Elite® Top Notch™ 9oz./sq.yd. polyester fabric) attaches beneath your factory installed T-Top or Hard-Top to cover your entire boat and motor(s), GUARANTEED TO FIT, custom made for the 1997 Boston Whaler® Dauntless 20 , $1,189.22 , SALE PRICE: $1,117.86 (FALL Sale) , Lead time est. 3-6 biz days (TTopCovers, Curtains) and 2-3 days (Shade Kits) after order finalization as of 10/20/26.
Bimini-Top Canvas (OEM) - Factory Bimini Top Replacement CANVAS (NO frame, sold separately) without Curtain Zippers, OEM (Original Equipment Manufacturer) (Sunbrella fabric), custom made for the 1997 Boston Whaler® Dauntless 20 , $1,681.74 , No longer sold by RnR-Marine. , This product is no longer available.
Bimini-Top Frame, Canvas & Boot (OEM) - Factory BIMINI TOP CANVAS, FRAME and BOOT without Zippers, with Mounting Hardware, OEM (Original Equipment Manufacturer) (Sunbrella fabric), custom made for the 1997 Boston Whaler® Dauntless 20 , $3,666.68 , No longer sold by RnR-Marine. , This product is no longer available.
Mooring-Cover-Sunbrella (OEM) - Factory MOORING COVER (NO Ski/Wake Tower), OEM (Original Equipment Manufacturer) (Sunbrella fabric), custom made for the 1997 Boston Whaler® Dauntless 20 , $4,059.96 , No longer sold by RnR-Marine. , This product is no longer available.
Carver® Unassembled Aluminim, Sunbrella® Bimini Top - Carver® UNassembled, folding Bimini Top with 2, 3 or 4 bow round aluminum tube frame, nylon fittings/hardware, straps and matching storage boot. Carver® has over 30 years of experience building Bimini-Tops and Boat-Covers (Sunbrella or Outdura acrylic, Sun-Dura or PolyGuard fabric), for your Boston Whaler® Dauntless 20 , [an error occurred while processing this directive] , Lead time est: 1 week for Covers/Tops , 2-4 biz days for Poles/Straps/Etc. after order finalization as of 10/26/26.
Carver® Unassembled Stainless Steel, Sunbrella® Bimini Top - Carver® UNassembled, folding Sunbrella® or Outdura® Acrylic Bimini Top with stainless steel round-tube frame/fittings/hardware, straps and matching storage boot. Carver® has over 30 years of experience building Bimini-Tops and Boat-Covers, for your Boston Whaler® Dauntless 20 , [an error occurred while processing this directive] , Lead time est: 1 week for Covers/Tops , 2-4 biz days for Poles/Straps/Etc. after order finalization as of 10/26/26.
Carver® Fully Assembled Stainless Steel, Sunbrella® Bimini Top - Carver® fully assembled, folding Sunbrella® or Outdura® Acrylic Bimini Top with stainless steel round-tube frame/fittings/hardware, straps and matching storage boot. Carver® has over 30 years of experience building Bimini-Tops and Boat-Covers, for your Boston Whaler® Dauntless 20 , [an error occurred while processing this directive] , Lead time est: 1 week for Covers/Tops , 2-4 biz days for Poles/Straps/Etc. after order finalization as of 10/26/26.
Boot Cover, Sunbrella® 9.25oz acrylic - Carver® Zippered Storage Boot Cover for folded Carver® Bimini, Pontoon or Tower Tops, available in a variety of sizes, widths and (20) Sunbrella® or Outdura® acrylic colors, for your Boston Whaler® Dauntless 20 , (click link to pick size) , Lead time est: 1 week for Covers/Tops , 2-4 biz days for Poles/Straps/Etc. after order finalization as of 10/26/26.

Boston Whaler® Dauntless 20 (1997) dual console boat: